5204AV-BM High Speed Exteneded Reach VDSL2 Bridge Modem

5204AV-BM High Speed Exteneded Reach VDSL2 Bridge Modem

In stock

DCE 5204AV-BM VDSL2 Modem Very High-speed Connectivity for Internet Access and IPTV service, hospitality, MDU and MTU applications.


The DCE/5204AV-BM is a single VDSL2 port modem equipped with four Ethernet ports by embedded 10/100Mbps Ethernet Switch. Compliant with ITU-T G.993.2 VDSL2 standard, the DCE/5204AV-BM supports the highest rate of up to 100Mbps/100Mbps in VDSL2 Profile (30a) with a 6-band solution.
 Since VDSL2 has the characteristic of faster rates over shorter distance, the DCE 5204AV-BM provides the ideal architecture for Telecoms to use fiber optic lines as the backbone and a VDSL2 line as the last mile into the home office.  
VDSL2 operates over copper wires so that telecom operators can provide bundled services to end-users similar to those that cable operators offer. With outstanding throughput, the DCE 5204AV-BM complements fiber networks in offering the best solution for delivering IPTV or home entertainment service.
The DCE/5204AV-BM also supports both central office (CO) and customer-premises equipment (Remote/CPE) modes for back-to-back applications.
In addition to forwarding Ethernet packets between VDSL2 port and Ethernet ports, the DCE 5204AV-BM also provides hardware IGMP snooping for IGMP V1/V2 to facilitate IPTV services without interfering with other applications.

Key Features

v  Compliant with ITU-T G.993.2 VDSL2 Standard

v  VDSL2 Profiles: 8a/b/c/d, 12a/b, 17a 30a

v  Band Plan 997 and 998 supported

v  Supports Back-to-Back (point-to-point) applications

v  Annex A, Annex B, Annex C supported

v  US0 Supported

v  OLR Supported

v  Ethernet packets over VDSL2

v  Integrated 4-port Ethernet Switch

v  DIP switch setting for CO and Remote (Point-to-Point / Bridging / LRE Applications)


Standard-compliant to ITU-T G.993.2
The DCE 5204AV-BM complies with the international standards and interoperates with other major/open chipsets. It supports multiple profiles (8a,8b,8c, 12a, 12b, 17a and 30a); different band plans (997, 998, and proprietary) and multiple annex types (Annex A, Annex B, and Annex C), by default factory settings to fit various requirements. Using the latest chip design technology, the DCE 5304AV-BM consumes less power (less than 2 watt per VDSL2 port) and has shorter training time to get the device up and running.

Long Reach Ethernet (LRE) / Back-to-Back / Point-to-Point Applications
In addition to using one DCE 5204AV-BM to connect to ISP/Telco’s DSLAM for accessing Internet or video services, users can utilize a pair of DCE 5204AV-BM for back-to-back applications. Theoretically the maximum length for Ethernet cable is within 100 meters. By using two 5204AV-BM modems, users can have 100/100Mbps connectivity over a twisted-pair phone line up to 200 meters or longer. This capability can help users to bridge two distinct LAN segments in longer distance or have surveillance service a little farther over existing twisted-pair phone cables.

Easy Installation
The DCE 5204AV-BM is easy to use and easy to setup. Simply connect the hardware interfaces without the need for complicated configuration efforts, the device will synchronizes with a VDSL2 DSLAM (VTU-O) in auto-negotiated mode and allow users to allow users to access the internet or watch IPTV almost instantly.

Features & Specifications

VDSL2 Compliance

·         Compliant with VDSL2 Standard, ITU-T G.993.2

·         VDSL2 Profiles: 8a, 8b, 8c, 8d, 12a, 12b, 17a and 30a

·         Supports 997 and 998 Band Plans

·         Supports Annex A, Annex B and / or Annex C

·         Upstream/Downstream connection rates 100/100Mbps

·         OLR (On Line Reconfiguration), US0 Supported

·         Supports Ethernet 802.3ah

Network Protocols and Features

·         Transparent bridging

·         Ethernet over VDSL (EoVDSL) Bridging

·         IEE 802.3/3u compliant

·         Hardware IGMP Snooping for IGMP v1/v2


·         Simple management function via console port

·         Firmware upgradeable (on demand)

Hardware Specifications
Physical Interface

·         VDSL: one RJ-11 connector

·         DIP Switch: DIP4 for configuring RT/COT mode

·         Console: PS2, for management function

·         Power jack

·         Power switch


Physical Specifications

·         Dimensions: 7.09” x 4.72” x 1.57” (180mm x 120mm x 40mm)

Power Requirements

·         Input: 12V DC, 1A

Operating Environment

·         Operating temperature: 0 – 40 °C

·         Storage temperature: -20 -70 °C

·         Humidity: 20-9% non-condensing 

More Information
Manufacturer Data Connect
Write Your Own Review
You're reviewing:5204AV-BM High Speed Exteneded Reach VDSL2 Bridge Modem
Your Rating