CalAmp Fixed/Portable Fusion LTE Router B17 AT&T GPS 22
$312.55
In stock
Description
The Data Connect ANS205-FT product uses Ethernet for transmitting a signal up to 2 Km(6,600 ft), and is the perfect solution for applications where transmission must be protected from electrical exposure, surges, lightning or chemical corrosion.
The Data Connect ANS205-FT operates at either half or full duplex mode. In full duplex mode The range is 2km with 62.5/ 125¨¬m fiber cables; in half duplex mode, range is 412m with 62.5/ 125¦Ìm fiber cables.
The Ethernet supports 10/ 100M auto-negotiation feature and auto MDI /MDIX function.
Automatic MDI / MDI-X crossover for plug-and-play
Each port supports both 10/100 Mbps speed auto negotiation
Store-and-forward architecture
Full duplex IEEE 802.3x and half duplex backpressure flow control
3.2Gbps high performance memory bandwidth
Frame buffer memory:512 Kbit
Integrated look-up engine with dedicated 1 K unicast MAC addresses.
Supports +10~+30Vdc voltage
Supports operating temperatures from 0 ~ +70¡ãC
DIN rail mount for industrial usage
Compatibility: IEEE 802.3, IEEE802.3u, IEEE802.3x
Interface: 10/100 Base-T(X) and 100 Base-FX(ST Connector; Multi-mode)
Ethernet Port: 10/100 Mbps x 4
Fiber Optic Port: 100 Mbps x 1
Provides LEDs for network and power monitoring
ESD Protection:
8 KV Contact Discharge
15KV Air-Gap Discharge
Fiber Optic Transmission distance:
Multi mode fiber:50/125, 62.5/125 or 100/140 ¨¬m
Multi mode fiber,412 m for half duplex, 2 km for full duplex
Ethernet Cables:
10 Base-T (Cat.3, 4,5 UTP cable; 100m Max.)
100 Base-TX (Cat.5 UTP cable; 100m Max.)
Environment:
Operating temperature: 0 ¡ãC ~ +70¡ãC
Storage Temperature: -20 ~ +85¡ãC
Relative Humidity: 10% to 90% non-condensing
Dimensions: 64 x 110 x 98 mm (W x H x D)
Power requirements: +10 to +30Vdc (Removable Terminal Block)
Power consumption: 0.14A@24Vdc (+/- 5%, arrowed)
Ordering Information:
ANS205-MM 5 100 Base-FX fiber-Multimode SC
ANS205-SM 5 100 Base-FX fiber-Single mode SC
ANS205-FT-M 5 100 Base-FX fiber-ST+ metal case
ANS205-MM-M 5 100 Base-FX fiber-Multimode SC+ metal case
ANS205-SM-M 5 100 Base-FX fiber-Single mode SC+ metal case
Additional information
Weight | 2 lbs |
---|---|
Dimensions | 5 × 5 × 5 in |