BiPAC GS2024-4S 24-port Gigabit Web Smart Switch with 4-Port Mini-GBIC (SFP)

CalAmp Fixed/Portable Fusion LTE Router B17 AT&T GPS

SKU - 172
In stock
• Smart power saving technology for efficient energy consumption
• Power savings by number of connected ports and link status
• Power savings by cable length
• Integrates 4 mini-GBIC (SFP) slots for optional fiber connection
• 24 Gigabit ports at N-Way protocol for speed and duplex mode auto-detection
• Wire-speed packet filtering and forwarding rate
• Store-and-forward architecture for low-latency and error-free transmission
• Supports Port mirror
• Supports RSTP, 802.1x, IGMP snooping
• Supports QoS function, 802.1p, DSCP priority
• Supports port aggregation up to 8 groups
• Supports up to 16 groups of VLAN table
• Web-based smart management interface
• Supports 8K MAC address
• 4M bit buffer memory
• 9K byte jumbo frame
• Ideal for SMB users

Flexible network expansion
Easily boost your networking throughput via the BiPAC GS2024-4S. This professional switch featuring 24 ports 10/100/1000Mbps interface is built for your business to expand to a Gigabit network. This attractive smart switch integrates 4 mini-GBIC (SFP) slots allowing users to select an appropriate transceiver for each link and provide the required optical reach over the available optical fiber type for flexible fiber connections. It is fully compliant with all major network protocols. Simply plug and play - you can connect any device with up to 24 computers or network-based hardware such as Network Attached Storage (NAS) for applications such as file, video, photo and data sharing.

Efficient network management
The smart management functionalities built into this switch enhance service and connection speed assisting MIS administrators. VLAN reduces the size of collision domains and increases network performance by limiting broadcast traffic. It supports up to 16 groups of VLAN table. Port Aggregation enlarges the bandwidth of the backbone connection. Tag- and port-based QoS is supported to guarantee high demand bandwidth applications such as VoIP and videoconference. The supported 802.3x standard and backpressure flow control mechanisms ensure the correction of data transmitting. The built-in web-based management interface enables the MIS to easily manage networks.

Enhancing network performance
The BiPAC GS2024-4S is based on non-blocking architecture that supports every switch port at full-duplex capability, enabling all its 24 ports to boost bandwidth up to a total 48Gbps backbone link to switched workgroup or a server fat-pipe links. This eliminates users concern about bandwidth congestion. Its store-and-forward switching mode at full wire-speed for maximum performance ensures low-latency and error-free transmission, thus efficiently saving user time and enhancing the joy of multimedia applications at maximum network performance

Standard Compliance
• IEEE 802.3ab 1000Base-T Gigabit Ethernet
• IEEE 802.3z Gigabit Ethernet (Fiber)
• IEEE 802.3u 100Base-Tx Fast Ethernet
• IEEE 802.3 10Base-T Ethernet
• IEEE 802.3x flow control
• IEEE 802.1q standards

• Packet filtering/forwarding rate:
- 1488,000pps for 1000Base-T port
- 148,800pps for 100Base-Tx port
- 14,880pps for 10Base-T port
• Wire-speed performance
• Supports jumbo frames: up to 9K bytes

Port Management
• Supports auto-detection for mini-GBIC module inset
• Supports Port Mirror
• Supports port aggregation up to 8 groups
• Supports QoS function, 802.1p, DSCP priority
• Supports Rate Limit
• Supports full duplex flow control and half duplex back pressure
• Supports up to 16 groups VLAN table
• Supports firmware upgrade
• Support SNMP, RSTP, 802.1x, IGMP snooping

Smart Power Saving Technology
• Creates less heat and extends product life
• Reduces power consumption
A. Power savings by number of connected parts and link status

MAC and Packet Buffer Memory
• 8K MAC entries
• 4M bits packet buffer

Traffic Management
• N-Way protocol for network speed (10/100/1000Mbps) and duplex mode (full & half) auto-detection
• MDI/MDI-X auto crossover
• Supports full and half duplex operation on all ports
• Back-pressure (half duplex) and flow control
• Transmission method: store-and-forward architecture filters fragment and CRC error packets

Hardware Specification
• Interface
- 24 x 10/100/1000 RJ-45 ports, auto-negotiation and
- 4 x mini-GBIC(SFP) port
- 1 x RS-232 port
- 1 x Restore Default Button
• Power Supply
- Internal power 100~240VAC, 50 / 60Hz
• Physical Specification
- Dimension: 17.36 ” x 5.11 ” x 1.73 ” (441 x 130 x 44 mm)

LED Indicators
• Supports extensive LED indicators for network diagnostics
- Power x 1: Green
- 10/100M Link/Act x 24: Green
- 1000M Link/Act x 24: Green
- Mini GBIC (SFP) slot shares the same LED indicator with the last 4 RJ-45 (copper) ports

Minimum System Requirements
• Devices Supporting 802.3 Ethernet, 802.3u Fast Ethernet, or 802.3ab Gigabit Ethernet
• Ethernet cable
• Network interface card for each computer

Operating Environment
• Operating temperature: 0 ~ 40°C (32 -104°F)
• Operating humidity: 10% ~ 90% (non-condensing)

• CE
• VCCI Class A

Note: All specifications are subject to change without prior notice.
More Information
Manufacturer BILLION
Write Your Own Review
You're reviewing:CalAmp Fixed/Portable Fusion LTE Router B17 AT&T GPS
Your Rating