Adtran TSU ACE T1/Fractional T1 CSU/DSU Marketing Information The ADTRAN TSU ACE is a low cost, fullfeatured T1/FT1 Data Service/ Channel Service Unit (DSU/CSU). Manufacturer Website Address www.adtran.com Technical Information Communication Type T1/Fractional T1 Ports 1 x 34-pin Serial V.35 Mechanical 8-pin RJ-48C Electrical Interface CCITT V.35 Data Transfer Rate 56Kbps to 1.536Mbps DTE 1.544Mbps Network Data Encoding AMI/B8ZS Input Signal 0 to -36 dB Diagnostics Features - Local: Payload/Line Loopback, DTE Loopback - Remote: Payload/Line Loopback, V.54 (DTE) Loopback - Network: CSU and DSU loopbacks Power Description Input Voltage 115V AC Frequency 60Hz Power Consumption 5W Environmental Conditions Temperature 0 to 50°C (32 to 122°F) Operating -20 to 70°C (-4 to 158°F) Storage Humidity Up to 95% Non-condensing Relative Humidity Miscellaneous Additional Information - Auto and Manual D4(SF) or ESF framing support - Easy to use front panel keypad for unit configuration - Remote configuration from host TSU via FDL or 8k in-band - Local and remote loopback capability - Extensive built in test capabilities - IEC standard power connection - DTE Transmit Clock: Automatic - Performance Monitor & Data: BPVs/CRCs, ES, SES, UAS, % AS, % EFSEC, Alarms, Errors - Reports: NI information stored for last 24 hours in 15 minute increments - PRMS: ANSI Performance Report Messages (User selectable) - Framing: - SF/ESF - Auto Detection - ESF Format: - AT&T 54016 - ANSI T1.403 - DSO Assignment: - Contiguous - Alternating - T1 Transmit Timing: - Network Loop Timed - Internal - DTE - Built-In Test Patterns: - 511 (active DS0s) with error insert available - 1:8 (all DS0s) - All 1's (all DS0s) - All 0's (all DS0s) System Requirments - Remote Configuration: - Required Software: - ADTRAN T-Watch Pro - Required Hardware (one of the following) - TSU LT (1203060L1) - TSU (1200060L2) - TSU RM (1202077L1) - TSU ESP (1200169L1) Certifications & Standards - FCC part 15 - Class A - FCC Part 68 - Industry Canada CS03 - UL - CUL Physical Characteristics Form Factor Desktop Wall-mountable Dimensions 1.5" Height x 9" Width x 6.25" Depth Weight 2 lb Warranty & Support Standard Warranty 5 Year(s) - North American