Key Features * Compliant with ITU-T G.993.2 VDSL2 Standard * VDSL2 Profiles: 8a/b/c/d, 12a/b, 17a, 30a * Band Plan 997 and 998 supported * Supports Back-to-back applications * Annex A, Annex B, Annex C supported * US0 Supported * OLR Supported * Compliant with VDSL2 MIB * Ethernet packets over VDSL2 * Integrated 4-port Ethernet Switch * DIP settings for RT/COT Benefits Standard-compliant to ITU-T G.993.2 The BiPAC 8200M complies with the international standards and interoperates with other major/open chipsets. It supports different profiles (8a, 8b, 8c, 8d, 12a, 12b, 17a, and 30a); different band plans (997, 998, and proprietary) and different annex types (Annex A, Annex B and Annex C), by factory settings to fit into different requirements. Benefit from the latest chip design technology, BiPAC 8200M consumes less power (less than 2 watt per VDSL2 port) and has shorter training time to make device up and running. Long Reach Ethernet (LRE): Back-to-back Applications In addition to using one BiPAC 8200M to connect to ISP/Telco’s DSLAM for accessing Internet or video services, users can utilize a pair of BiPAC 8200M for back-to-back applications. Theoretically the maximum length for Ethernet cable is within 100 meters. With two 8200M modems, users can have 100/100Mbps connectivity over a twisted-pair phone line up to 200 meters or longer. This capability can help users to bridge two distinct LAN segments in longer distance or to have surveillance service a little farther over existing twisted-pair phone cables. Easy Installation The BiPAC 8200M is easy to use. Simply connect the hardware interfaces without the need for complicated configuration efforts, the device will synchronizes with VDSL2 DSLAM (VTU-O) in auto-negotiated mode and allow users to access the Internet or watch IPTV instantly. VDSL2 Compliance • Compliant with VDSL2 Standard, ITU-T G.993.2 • VDSL2 Profiles: 8a, 8b, 8c, 8d, 12a, 12b, 17a and 30a • Supports 997 and 998 Band Plans • Supports Annex A, Annex B and/ or Annex C • Upstream/Downstream connection rates 100/100Mbps • OLR (On Line Reconfiguration), US0 Supported • Supports Ethernet 802.3ah Network Protocols and Features • Transparent bridging • Ethernet over VDSL (EoVDSL) Bridging • IEEE 802.3/3u compliant • Hardware IGMP Snooping for IGMP v1/v2 Management • Simple management function via console port • Firmware upgradable (on demand) Hardware Specifications Physical Interface • VDSL: one RJ-11 connector • DIP Switch: DIP4 for configuring RT/COT mode • Ethernet: 4-port 10/100Mbps auto-crossover (MDI / MDI-X) Switch • Console: PS2, for management function • Power jack • Power switch Physical Specifications • Dimensions: 7.09" x 4.72" x 1.57" (180mm x 120mm x 40mm) Power Requirements • Input: 12V DC, 1A Operating Environment • Operating temperature: 0 - 40 °C • Storage temperature: -20 - 70 °C • Humidity: 20 - 95% non-condensing