CDS-9022 CDMA Data Modem from DCE Data Remote STANDARD FEATURES Authentication Preferred Roaming List IS-707A service SMS commands MS via AT-Commands TCP/PPP Update PRL while unit is in the field Configuration menu remotely or locally programmable Inputs for cry-out alarms Call processing: CDMA digital 800MHz, and CDMA PCS 1900 MHz TYPICAL APPLICATIONS Automatic meter reading Security system monitoring via RS-232 Slow-speed video applications Heavy equipment monitoring Traffic metering and programming highway displays Connects to RTU's, PLC's, Data loggers, etc. through a DTE RS-232/485 port Flood control monitoring Remote equipment sensing and control Pre-programmed emergency calls to 911 or dispatcher General Specifications Power Requirements: 10.5-20VDC @ 1.2A (unregulated) On-Board Backup: 3V 200MA (CR2032) Lithium Cell Serial I/O: RS-232, Async, 2 DB-9 and 1 - 8 pos. terminal block Connectors Control I/O: 12 Pos. IDC compatible header Command Protocol: AT Command Set and DataRemote, Inc (DRI) Configuration Menu LED Indicators: Power ON, Status, TXD, RXD, DCD, DTR Modem: IS-707A compatible, IS-95A/B (MDR verified on IS-95A/B networks) Vocorder: 8 Kbps CELP, 13 Kbps QCELP, 8 Kbps EVRC FCC ID: QVFQCP-2035 Canada ID: 3572291146 RF SPECIFICATIONS 800 MHz (CDMA) 1900 MHz (CDMA) Interface Standards: TIA/EIA, IS-95A/B J-STD-008 Operating Frequencies: TX: 824-849 MHz RX: 869-894 MHz TX: 1850-1910 MHz RX: 1930-1990 MHz RF Power: 200mW (EIRP Nom.) 200mW (EIRP Nom.) Maximum TX Power: +23dBm Min. +23dBm Min. Receiver Sensitivity: >-104dBm @ 0.5% FER >-104 dBm @ .05% FER Frequency Stability: < ± 2.5 PPM < ± 2.5 PPM Antenna Interface: 50 ohm, TNC 50 ohm, TNC PHYSICAL SPECIFICATIONS Size: 6.5"L X 3.7"W X 2.5" H Weight: 24.0 Oz. ENVIRONMENTAL SPECIFICATIONS Temperature: Operating: -30° C to +60° C Storage: -40° C to +70° C Humidity: 0-95% (non-condensing) AVAILABLE OPTIONS Custom scripts for ProComm+® for remote access Remote equipment sensing and control