The eLink-300 Family Verso / Verilink's eLink-300 Family are highly-automated plug-and-play IADs for delivering integrated voice and data services without "truck rolls." Verso / Verilink's AutoCAP functionality handles all configuration, installation, and provisioning automatically to deliver significant operational savings to service providers rolling out integrated or bundled services to their customers. eLink-300 IADs consolidate the functionality of a channel bank for integrating voice connections, an IP router for transporting data, a CSU/DSU for terminating the T1 line or Frame Relay connection from the carrier, a DHCP server for IP address management, and a firewall for LAN security. eLink 300 offers support for FXO and FXS ports and FT1. The Verso / Verilink eLink™-300 family of IADs is an ideal solution for small, and medium businesses looking to integrate voice, data, and Internet access over a single network interface. These all-in-one solutions simplify networks and lower operating costs by combining a channel bank and advanced call handling for voice connections, an IP router for data transport, a CSU/DSU for line termination, a DHCP server for address management, and a firewall for LAN security in a single compact unit. The eLink-316 provides up to 16 analog voice interfaces, and the eLink-324 provides a full 24. They also include a 10/100 Base-T LAN port. ePorts™ allows a business to purchase just the capacity it currently needs, and expand that capacity at any time by activating additional ports. Advanced configuration and provisioning upport through Verso / Verilink’s unique AutoCAP™ functionality makes the eLink-300 a plug-and play solution that allows service providers to automatically install, configure, and provision the system. By automatically detecting and setting all system parameters, AutoCAP significantly cuts typical set-up and installation time. Multiple options, including SNMP, menu-based interface, Telnet, web interface, and a console port simplify network management. The eLink-300 family provides a complete, scalable solution for voice and data integration at a very economical price point for small and medium businesses. USER INTERFACES Analog Support Capacity FXS: 4 – 16 ports; FXO: 8 ports Supported Features FXS: Loop start/ground start; modem support, caller ID pass-through for loop start/ground start, message waiting notification; FXO: Loop start/ground start DID Ringing FXS: Balanced 15 REN, 87 Vrms, Unbalanced 25 REN, 82 Vrms; FXO: 1.5 REN per port, 20 Hz balanced ringing Tx/Rx Gain Adjust Tx: 0dB, -3db or –6dB; Rx: 0dB, -3db, –6dB, or –12dB Impedance 600/900 ohms Loop Length Limit 6,300 ft. (24 AWG), 3,900 ft. (26 AWG) Line Connector RJ21 FT1/2nd WAN T1 Features Loop start/ground start/E&M, PRI pass-through Line Connector RJ48C 10/100 Ethernet Standards IEEE 802.3, autosensing Transmission Mode Full or half duplex Line Connector RJ45 Console Port Interface RS-232 Parity No parity, 8 bits, 1 start, 1 stop Modes Ready to connect to terminal, Dial modem Baud Rates 9,600, 19,200, 38,400 Line Connector RJ45 NETWORK INTERFACE T1 Lines 1 or 2 T1s Line Rate 1.544 Mbps per T1 Data Rate N x 64 Kbps (N = 1-24) Framing SF (04), ESF, TR-08, (SLC96) Line Coding B8ZS, AMI Line Connector RJ48C NETWORK SERVICES Frame Relay LMI LMI T1.617 annex D, LMI Q.933 annex A PVCs Max. 30 PVCs IP NETWORKING Packet Thoughput Line rate Routing RIP I/II, Static, Backup default routing Features IP over (Frame-relay (RFC 1490), PPP, HDLC, FDL) PAT/NAT (5000 sessions), Configurable NAT sessions timers, IP/QoS (Fair queuing), DiffServ, DHCP server, DNS proxy, Telnet, FTP, NTP, Trace route, Ping, SYSLOG Firewall Support Filtering Enhanced IP filtering MANAGEMENT SNMP MIBs per RFC1213, RFC1315, RFC1406 Support Tools Status and statistics on all interfaces; integrated voice diagnostics Management Access Console/Telnet, menu-driven commands/script interface, web access POWER AC 100-130 V AC, 60HZ, 60VA (with supplied transformer) DC 36-56.5V DC, 60VA BTUs 316: 102.39 BTUs/hr; 324: 146.51 BTUs/hr PHYSICAL CHARACTERISTICS Usage Wall mount, desktop usage Size 1.75” H x 12.5” W x 10” D (4.5 x 31.75 x 25.4 cm) Shipping Weight 6-8 lb (2.72 - 3.62 kg)