WANsuite 5230 / 5260 The WANsuite® 5230 and 5260 are intelligent access devices that can be used for private leased line or Frame Relay networks for E1 or Fractional E1 connections. Each unit serves as an enhanced CSU/DSU with a software-selectable data port (two ports on the 5260) and a 10/100Base-T Ethernet port for routing and management. The units provide network statistics for Layer 1, Layer 2, and Layer 3, auto discover DLCIs, offer LMI sourcing to maintain the frame circuit in the event of equipment failure, and provide the statistics needed to enforce Service Level Agreements. The 5260 also features automatic protection switching on the data ports and offers a DSX port for digital voice and can be used as an in-line probe of a Frame Relay circuit. Both models offer SNMPv.2 and remote management with a simple-to-use Web browser interface. Highlights E1/FE1 WAN access device with built-in router/bridge IP host access list and two levels of password protection for enhanced network security DSX port for digital voice or in-line probe applications Software-selectable serial ports Supports TDM, Frame Relay, and PPP applications Embedded web-based management tools SLA verification with Layers 1, 2, and 3 performance statistics collection Supports up to 128 DLCIs Supports DHCP server and client Built-in service aware technology for real-time measurement of bandwidth utilization, network delay, and verifying SLAs 10/100Base-T Ethernet interface Supports RIP1, RIP2, and OSPF routing protocols SPECIFICATIONS WANsuite 5230 E1/FE1 CSU/DSU, Router Network: 1, Data: 1 Software-selectable WANsuite 5260 E1/FE1 CSU/DSU, Router Network: 2 ports; 1 primary, 1 equipment PA RT NUMBER AND DESCRIPTION 1100007: WANsuite 5230 AC power 1100006: WANsuite 5260 AC power 1100058: WANsuite 5230 DC power 1100057: WANsuite 5260 DC power cables and accessories included with units: 9-1544-619-009: RJ-48/RJ-48 Pin to Pin, 9 ft 33-00221: DB-9M to DB-9F, 6 ft SERIAL INTERFA C E DTE Port: Software-selectable V.35, EIA-530, RS-232 Data Rate: Sync: 1200 - 115200 bps and Nx64 (N=1 to 32); Async: 1200 - 115200 bps Connection : DB-25 female NETWORK INTERFA C E Line Rate: 2.048 Mbps (± 50 bps) Data Rate: Nx56/64 kbps to 2.048 Mbps, where N=1 to 32 DSOs Line Code: AMI or HDB3 Line Framing: CAS, CCS, or 2 Mbits unframed Protocol : TDM, Frame Relay Connection : BNC jack, 75 ohms ± 10%, RJ-48C jack, 120 ohms ± 10% Input Signal: E1, +1 to -27 dB Output Signal: 3.0 V base-peak into 75 or 120 ohms Line Protection : 1000 V protection, fused input and output per GR 1089 Ones Density: HDB3, alternate fill 2.048 kbps Interface: Per ITU-T G.823, G.703, G.704 ETHERNET INTERFACE Connection: 8-pin modular Compatibility: 10/100 Base-T, Autosensing Protocols: RIP1, RIP2, OSPF, TCP/IP, un-numbered ADVANCED FEATURES NAT/NAPT, PPP/NAPT Dynamic IP DHCP server/client TCP server IP Host Access List MANAGEMENT INTERFACE WANsight (embedded Web - server interface), VT100, Telnet, SNMPv.2, local supervisory port, Ethernet port INDUSTRY LISTINGS FCC Compliance: Part 15 Subpart B, Class A, Part 68 US Safety: UL 1950 3rd Edition Canadian Safety: CSA C22.2 No. 950-95 Industry Canada: CS-03, Issue 8 BellCore : GR - 1089 - Core Part 3 FRAME RELAY STATISTICS COLLECTED IN 96 15-MINUTE INTERVALS Tx/Rx frames and octets Tx/Rx mgmt frames and octets Rx frames with FECN, BECN Rx invalid frames Tx/Rx status inquiry frames Tx/Rx status response frames Rx invalid LMI frames Peak/Average throughput Rx frames with DE bit set Tx excess CIR and Be Verso / Verilink’S SERVICE AWARE TECHNOLOGY Layer 3 Statistics and Up: IP, PPP, TCP, UDP, FTP, TFTP, SNMP, RIP1, RIP2, BootP, SMTP, HTTP, ICMP, OSPF, L2TP, H.323 Peak and Average Throughput on Up to 10 User- Definable Filters: DLCI, IP address, or IP port number Top talkers VERIFY SERVICE LEVEL AGREEMENTS (FRF. 1 3) Frame delivery ratio Data delivery ratio Round trip delay Service availability in seconds WARRANTY AND SUPPORT Five-year warranty