Shop

DCE IG336S-LV V.34 33.6KBPS STANDALONE DIAL MODEM -HIGH VOLTAGE-0

DCE IG336S-LV V.34 33.6KBPS STANDALONE DIAL MODEM -HIGH VOLTAGE

$318.25

In stock

SKU: SKU - 767 Category:

Description

DATA CONENCT IG336S-LV V.34 33.6KBPS STANDALONE DIAL SECURITY MODEM -LOW VOLTAGE

The Data Connect DCE/IG336S high-speed V.34bis security dial-line modems are designed and manufactured for rugged industrial applications over the Public Switched Telephone Network (PSTN) with security features such as password log-in and security call-back. The DCE/IG336S utilizes the industries latest
V.34bis modem technology to deliver outstanding features, performance and reliability in one cost-effective solution.
The DCE/IG336S modem are ideally suited for industrial communication applications including SCADA systems, RT’s, traffic monitor and control, and industrial automation network. The DCE/IG336S supports RTUs equipped with an EIA RS-232 or RS-485 serial port. Data communications speed up to 33.6 kbps are supported.
The modems incorporate the latest data-compression and error-correction standards for improved data transmission and reception over marginal and poor-quality telephone lines. Multiple levels of security with password verification and security call back keep your valuable data secure from intruders.
The DCE/IG336S modems are powered by a wide range of AC and DC power supply voltages. Its low consumption and low stand-by current technology design makes the DCE/IG366S is ideal for battery-powered system as well as regular AC powered operations.

FEATURES
Worldwide Operation Support:
-ITU-T V.34bis/V.34/V.32bis/V.32
-ITU-T V.22bis/V.22/V.23/V.23/V.21
-Bell 212A/Bell 103
-V29 FastPOS
-V.22bis fast connect
-V.44/V.42bis/MNP 2
-V.42/MNP 2/MNP 4
Security Options:
-password log-in
-Security call-back
DTE/ Host Interface
EIA RS-232 and RS-485
Embedded AT command set
Sixty-three embedded and upgradable country profiles for worldwide homologation
NVRAM for configuration and country profile storage
Built-in remote diagnostics and configuration management
Heavy-duty surge protection provided at power supply and phone line interface
Supports wide range of AC and DC power supply options
Supports DC power supplied from DTE or DB-9 connector
Wide range of operating temperatures
Optional mounting kits for DIN Rail mounting or wall mount

SPECIFICATIONS
Data Rate Support
Data modem
ITU-T V.34bis: Up to 33.6kbps
V.34: Up to 28800 bps
V.32bis/V.32: Up to 14400 bps
V.22bis: Up to 2400 bps
V.21: 0-300 bps
Bell 212A: 1200 bps
Bell 103: 0-300 bops
Fax modem
Send and receive fax up to 14.4 kbps
V17, V29, V27ter, and V21 channel 2
EIA/TIA 578 Class 1, T.31 Class 1.0, and Class 2
Data Format
Asynchronous, 7, 8 or 9 data bits, parity, 10- or 11-bits character with 1 or 2 stop bits
Modulation
Fully compatible with ITU-T V.34bis/V.34/V.32bis/ V.22bis/V.21 Bell 212A and Bell 103 compatible modes.
Transmission Line Interface
2-wire full duplex over PSTN
Connector: RJ-11C
DTE/RTU Interface
The modem provide serial ports to support RS-232 or RS-485 (selectable) interface standards:
RS-232 Interface
Connector: DB9-F
Signal: RTS, CTS CD, TD, RD, DT, DSR, RI
RS-485 Interface
Connector: RJ-11C
Signals: 4-wire full-duplex or 2-wire half-duplex
TX+, TX-, RX+, and RX-
Front Panel Indicators
LED. Indicators:
DTR, TXD, RXD, DCD, DSR, RI
Security Options
Password Log-in
Security call-back

Power Supply
Three models support various
power options:
Standalone: 90-264VAC
Standalone 100-400VDC
Standalone 10-48 VDC
Power Consumption:
Idle mode: 65 mA@12V, 0.78 watts
Normal mode: 75 mA@12V, 0.9 watts typical
Mechanical
Enclosure dimensions:
4.1”(W) x 5.0”(L) x 1.3”(H)
104mm(W) x 127mm(L) x 33mm(H)
Weight: 0.5 pound, without AC power module
Environment
Temperature:
Operation: -40C to + 85C
Storage: -40C to + 85C

Humidity:
Up to 95% non-condensing
Dry Contact Detection (optional)
Two optical isolated dry contact detections are provided for external devices (consult factory for additional information).

ORDERING INFORMATION
DCE/IG336S Standalone with AC power module, 90-264VAC
DCE/IG336DC Standalone, DC power, 10-48 VDC
DCE/IG336-HV Standalone with AC power module, 90-264VAC or 100-400VDC
DCE/IG202T-DIN DCE EN2 Din Rail Kit

Additional information

Weight 2 lbs
Dimensions 5 × 5 × 5 in