Shop

ETHERWAN 42014-1A-1-A NON-MANAGED INDUSTRIAL ETHERNET SWITCH-0

ETHERWAN 42014-1A-1-A NON-MANAGED INDUSTRIAL ETHERNET SWITCH

$189.05

In stock

SKU: SKU - 1130 Category:

Description

The EX42000 series compact Fast Ethernet Switches are equipped with 5-port 10/100Base-TX or 4-port 10/100Base-TX plus 1-port 100Base-FX. By using standard
auto-negotiation and the inclusion of auto-MDIX, EtherWAN provides a cost-effective way of integrating legacy 10Mbps networks with 100Mbps Fast Ethernet
networks. The TX ports auto-negotiate for 10/100Mbps speed and auto-detect
Full or Half-duplex mode. The fiber port on EX42014 is available with SC or ST with a fiber connection between two nodes that can reach up to 120Km (74.4miles). EX42000 series can be DIN-Rail mounted and is equipped with Terminal Block power input to match the industrial applications that require an Ethernet Switch.

FEATURES
-Complies with IEC61000-6-2 EMC Generic standard immunity for Industrial environment
-2048 MAC addresses
-384K bits buffer memory
-10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX
-12 to 48VDC Power inputs
–10°C to 60°C (14°F to 140°F) operating temperature range
-Industrial plastic case
-Supports DIN-Rail Mounting installation
-Full wire-speed forwarding rate

ORDERING INFORMATION
EX42005-00-I-P 5-port 10/100Base-TX Industrial Unmanaged Ethernet Switch
EX42014-XY-I-P 4-port 10/100Base-TX + 1-port 100Base-FX Industrial Unmanaged Ethernet Switch
EX42011-XY-I-P 1-port 10/100Base-TX + 1-port 100Base-FX Industrial Unmanaged Ethernet Switch

100FX Fiber Options:
(XY) = 1A : Multi Mode (SC)
1B : Multi Mode (ST)
2A : Single Mode (SC) -20Km
2B : Single Mode (SC) -40Km
2D : Single Mode (ST) -20Km
2E : Single Mode (SC) WDM -TX:1310nm/RX:1550nm -20Km
2F : Single Mode (SC) WDM -TX:1310nm/RX:1550nm -40Km
2G : Single Mode (SC) WDM -TX:1550nm/RX:1310nm -20Km
2H : Single Mode (SC) WDM -TX:1550nm/RX:1310nm -40Km

*More 100FX Fiber options also available upon request.

Installation Type:
(I) = 1 : DIN Rail (mounting kit is included)

Power Connector Options :
(P) = A : Terminal Block*
*Option A – The Terminal Block type external power supply are not included. Please order the following part numbers,
as required: DR-30-24, DR-60-24, DR-75-24, DR-120-24 or 41-136046-X X=1,2,3,4,5
*See page 4-5 to 4-9 for more detailed information about optional accessories (Din-Rail Power supply, Power adapter)

SPECIFICATIONS
Technology
Standards:
IEEE802.3 10Base-T, IEEE802.3u 100Base-TX/100Base-FX,
IEEE802.3x
Forward and Filtering Rate:
14,880pps for 10Mbps
148,810pps for 100Mbps
Packet Buffer Memory:
384K bits
Processing Type:
Store-and-Forward
Half-duplex back-pressure and IEEE802.3x full-duplex flow control
Address Table Size:
2048 MAC addresses
Latency:
Less than 5.1ìs
Power
Input:
Input Voltage: 12 to 48VDC (Terminal Block)
Power Consumption:
2.4W Max. 0.2A@12VDC, 0.1A@24VDC, 0.05A@48VDCPower Supply References:
Terminal Block: 12 to 24VDC, 1.5A
Overload Current Protection:
Present
Reverse Polarity Protection:
Present
Mechanical
Casing:
Plastic case IP30
Dimensions:
26mm (W) x 70mm (D) x 110mm (H)
(1.02″ (W) x 2.76″ (D) x 4.33″ (H))
Weight:
0.2Kg (0.44lb.)
Installation:
DIN-Rail Mounting
Interface
Ethernet Port:
10/100Base-TX: 5, 4 or 1 ports
100Base-FX: 0 or 1 ports
LED Indicators:
Per Unit: Power Status (Power 1, Power 2)
Per Port: 10/100TX, 100FX: Link/Activity (Green), Speed (Yellow)
Environment
Operating Temperature:
-10°C to 60°C (14°F to 140°F)
Storage Temperature:
-25°C to 85°C (-13°F to 185°F)
Ambient Relative Humidity:
5% to 95% (non-condensing)
Regulatory Approvals
ISO:
Manufactured in an ISO9001 facility
Safety:
UL60950-1, EN60950-1, IEC60950-1
EMI:
FCC Part 15, Class A
EN61000-6-3
EN55022
EN61000-3-2
EN61000-3-3
EMS:
EN61000-6-2
EN61000-4-2 (ESD Standards)
Contact: + / – 4KV; Criteria B
Air: + / – 8KV; Criteria B
EN61000-4-3 (Radiated RFI Standards)
10V/m, 80 to 1000MHz; 80% AM Criteria A
EN61000-4-4 (Burst Standards)
Signal Ports: + / – 4KV; Criteria B
D.C. Power Ports: + / – 4KV; Criteria B
A.C. Power Ports: + / – 4KV; Criteria B
EN61000-4-5 (Surge Standards)
Signal Ports: + / – 1KV; Line-to-Line; Criteria B
D.C. Power Ports: + / – 0.5KV; Line-to-earth; Criteria B
A.C. Power Ports: + / – 2KV; Line-to-earth; Criteria B
EN61000-4-6 (Induced RFI Standards)
Signal Ports: 10Vrms @ 0.15~80MHz; 80% AM Criteria A
D.C. Power Ports: 10Vrms @ 0.15~80MHz; 80% AM Criteria A
A.C. Power Ports: 10Vrms @ 0.15~80MHz; 80% AM Criteria A
EN61000-4-8 (Magnetic Field Standards)
30A/m @ 50, 60Hz; Criteria A EN61000-4-11 (Voltage Dip Standards)
A.C. Power Ports: 30% Reduction for 0.5 period; Criteria BEnvironmental Test Compliance:
IEC60068-2-6 Fc (Vibration Resistance)
5g @ 10~150KHz, Amplitude 0.35mm (Operation/Storage/Transport)
IEC60068-2-27 Ea (Shock)
25g @ 11ms (Half-Sine Shock Pulse; Operation)
50g @ 11ms (Half-Sine Shock Pulse; Storage/Transport)
IEC60068-2-32 Ed (Free Fall)
1M (3.281ft.)
1

Additional information

Weight 2 lbs
Dimensions 5 × 5 × 5 in