In stock

SKU: IG96HFP-LV Category:


Boasting the latest innovative digital signal processing (DSP)-based communication device, the DSP19.2FP delivers a cost-effective 19200 bps asynchronous solution for point-to-point and multipoint connectivity. This is the low voltage version of this modem. The Data Connect IG192HFP
Industrial Grade 19.2kbps Hyper Fast Poll
industrial modem is the highest performance
triple mode, full featured leased line modem
of its class. These modems are designed for
rugged industrial automation, utility, and
SCADA communications. Boasting the latest
innovative digital signal processing (DSP)
technology, the IG192HFP modem delivers a
17.4 ms training time (RTS-CTS delay) at
19200bps. The modem will fall back to
support 9600/4800/2400 bps at 23 ms RTSCTS
delay, as well as Bell 202T and V.23
operation. The IG192HFP is ideal for point-to-point and multi-point polling network with the industry’s
fastest training time.
The IG192HFP Industrial Grade 19.2 kbps Hyper Fast Poll modem is designed to operate over 4-
wire full duplex or 2-wire half duplex unconditioned leased lines or private metallic circuits. For optimum
performance, the modem employs QAM modulations and Viterbi decoding scheme along with its adaptive
equalizer to communicate over a variety of transmission lines. The IG192HFP supports DTE/RTUs with an
EIA RS-232 and RS-485 serial port at speeds of 19200, 9600, 4800, 2400, and 1200 bps. With its Auto-
RTS mode, the modem can support DTE/RTUs with 3-wire serial interface (TD, RD, SG) in point-to-point
and multi-point polling applications.
The triple mode capability allows the IG192HFP Industrial Grade 19.2 kbps Hyper Fast Poll modem
to communicate with the older generation DSP9612FP at up to 9600 kbps and both the Bell 202T and V.23
FSK modems at up to 1200 bps.
The IG192HFP Industrial Grade 19.2 kbps Hyper Fast Poll modem is designed to operate over a
wide range of AC or DC power supply voltages and temperatures. With proven reliability and ease of
installation, the IG192HFP is ideal for point-to-multipoint polling networks, where fast training time and lownetwork
latency are critical for system performance.
Triple Mode:
Hyper Fast Poll mode at 19200bps. 17.4 ms RTS-CTS delay
QAM mode at 9600/4800/2400bps. 23 ms RTS-CTS delay
FSK mode for both Bell 202T (0-1800bps) and V23 (0-
AC and DC Power Support
Standalone: 10-48 VDC, 85-400 VDC, 100-240 AC
Rack Mount module: Plug-in RM16M modem rack
DTE/RTU Interface:
RS-232 interface with full control signals support (DB-9F)
RS-485/RS422 support, 4-wire F.D., or 2-wire H.D.
Auto RTS and forced RTS option to support 3-wire interface
Operating Temperature: -40 to 85°C,
Storage Temperature: -40 to 100°C
Humidity: up to 95%, non-condensing
Leased Line Interface:
TELCO 2- or 4- wire conditioned or unconditioned lines
Private metallic 2 or 4 wire circuits
Cable equalizers for long distance over standard cables
Optional Mounting Kits:
Wall-mount or panel mount kit
DIN rail mounting kit
Enclosure Dimensions:
5.0″(W) x 6.75″(L) x 1.3″ (H)
127mm(W) x 172mm(L) x 33mm(H)
Power + Current Consumption
125 mA @ 12 VDC
28.0 mA @ 48VDC
Local or remote Analog + digital loopback
Eight (8) front panel LEDs for status monitoring

Ordering Information
IG192HFP Standalone AC voltage (100-240 VAC)
IG192HFP-LV Standalone DC voltage (10-48 VDC)
IG192HFP-HV Standalone High DC voltage (100-240 VAC, 85-400 VDC)
IG192HFP-RM RM16M Rack-mount module
IG192HFP-WMB Wall-mount/panel-mount kit
IG192HFP-DIN DIN rail mounting kit

Additional information

Weight 2 lbs
Dimensions 5 × 5 × 5 in