DATA CONNECT MNS208L2-M-0

DATA CONNECT MNS208L2-M

$607.05

In stock

SKU: MNS208L2-M Category:

Description

The Data Connect MNS208L2-M is an 8-Port Industrial Ethernet (10/100Base-TX) Layer 2 Managed Switch. Data Connect MNS208L2-M supports 10/100M auto-negotiation feature and auto MDI /MDI-X function. It can automatically switch the transmission speed (10 Mbps or 100 Mbps) for corresponding connections. The connectors of Ethernet port are shielded RJ-45. The shielded RJ-45 connectors offer a high reliability Ethernet environment for industrial control and automation.

It can be managed through RS-232 port via serial console or Ethernet port using telnet or Web browser. In addition, the switch supports a lot of powerful managed functions, such as 802.1Q Tag-based VLAN, Port-based VLAN, 802.1p QoS (Quality of Service), Port Trunking, Spanning Tree, Cable Testing and Port Mirroring. Built-in ICP DAS Cyber-Ring technique that enable multiple switches to be placed into a redundant ring. The switch detects and recovers from a fiber or copper link failure within approximately 50ms – for the majority of applications a seamless process. Modbus/TCP, Modbus/RTU and OPC supported, SCADA application can monitor status of Ethernet port with Modbus or OPC protocol.

Data Connect MNS208L2-M provides two power inputs that can be connected simultaneously to live DC power sources. If one of the power inputs fails, the other live source acts as a backup to automatically support the Data Connect MNS208L2-M’s power needs. And, the relay output facility can deliver warning signal while dual power or network link failure.

Automatic MDI / MDI-X crossover for plug-and-play
Each port supports both 10/100 Mbps speed auto negotiation
Store-and-forward architecture
Full duplex IEEE 802.3x and half duplex backpressure flow control
3.2Gbps high performance memory bandwidth
Frame buffer memory : 1 Mbit
Integrated look-up engine with dedicated 2048 unicast MAC addresses.
Redundant Power Inputs +12 ~ +48V DC
Power failure alarm by relay output
Supports operating temperatures from -40°C ~ +75°C
DIN rail mount and Screw hole for wall mounting kit.

Technology
Standards IEEE 802.3, 802.3u and 802.3x
Processing Type Store & forward, wire speed switching
MAC Addresses 2048
Memory Bandwidth 3.2 Gbps
Frame Buffer Memory 1 Mbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Protocol VLAN, QoS, Port Trunk, SMTP, TELNET, SNMP
Interface
RJ-45 Ports 10/100 Base-TX auto negotiation speed, F/H duplex mode, and auto
MDI/MDI-X connection
LED Indicators Power, 10/100M, Link/Act, Master
Ethernet Isolation 1500 Vrms 1 minute
COM1 RS-232 (TXD, RXD and GND); Non-isolation
COM2 RS-485 (D2+, D2-; self-tuner ASIC inside); Non-isolation
Frame Ground for EMS Protection Yes
Digital Input/Output
Digital Input 3-channel, Wet Contact, L: +11 VDC Max., H: +19 VDC ~ +30 VDC
Digital Output 3-channel, Open Collector, Sink/NPN, 30V/100 mA Max.
Power
Input Voltage Range +12 VDC ~ +48 VDC (Non-isolation redundant input)
Power Consumption 0.25 A @ 24 VDC, +/-5% arrowed with 100M Full duplex
Protection Power reverse polarity protection
Frame Ground for EMS Protection Yes
Connection 20-Pin Removable Terminal Block
Mechanical
Casing Metal
Environmental Rating IP30 Protection
Dimensions 47 mm x 128 mm x 175 mm (W x L x H)
Installation DIN-Rail or Wall mounting
Environmental
Operating Temperature -40 °C ~ +75 °C
Storage Temperature -40 °C ~ +85 °C
Ambient Relative Humidity 10% ~ 90% RH, non-condensing
Include Cable
CA-090510 x 1

Additional information

Weight 2 lbs
Dimensions 5 × 5 × 5 in