Data Connect ST2400E-030-4 Dial and Leased Line Modem, V22bis, V22, V21, BELL 212A, BELL 103J, DC power 9-72 VDC or AC
2400 in stock
There are many applications where nothing will do the job as reliable or economically as a low speed modem. StarComm understands low speed modem requirements and is committed to the ongoing development and production of a full range of products.
The StarComm family of low speed modems ranges from products as generic as our 2400bps smart modem to specialty items such as the 2400EQ quick connect modem for the transaction processing industry. In between, you will find a range of devices capable of dial or leased line operation at all speeds from 2400bps on down to those low bit rates that can only be accomplished with a Bell 103 FSK modem. When your requirements call for a commercial quality, low speed device, you can count on StarComm to provide the right solution.
2400E SMART MODEM – This device provides a complete implementation of the standard 2400bps smart modem. It provides compatibility with the V22bis, V.22, Bell 212A, and Bell 130J standards for modem operation and offers a complete AT command set for configuration and dialing. In addition, this device offers a “dumb” mode of operation for connection to equipment such as telephone switches or control systems that may be constantly streaming data. The 2400E is available in our standard stand alone package and may be connected to either an AC or DC supply.
2400EQ QUICK CONNECT TRANSACTION MODEM – This device is designed to provide a unique quick connect sequence which dramatically decreases the connect time required for transaction processing. Although the 2400EQ utilizes a unique connect sequence, it is compatible with standard V.22bis, V22, Bell 212A, and Bell 130J modems and is currently in operation with all major credit card terminals. The 2400EQ offers an internal speed buffer so that the authorization computer (DTE) may communicate with the modem at 2400bps while the modem automatically adjusts to calls at 2400bps, 1200bps or 300bps. The 2400EQ provides a standard AT command set for configuration and control. The 2400EQ is available in either stand alone or rack mount configurations and may be powered from an AC or DC supply.
2400E-2 DIAL AND LEASED LINE MODEM – In addition to all of the features and in our 2400E smart modem, this device offers a 2 and 4 wire leased line interface which is capable of driving standard leased telephone circuits or short haul twisted pair. Another unique feature of this device is its ability to communicate at any bit rate Both I — 300bps when operating in Bell 103 mode. Since the 2400E-2 utilizes an on-board micro-controller, custom interfaces and options, such as speed buffering and protocol support, can be implemented for OEM applications. The 2400E-2 is available in either stand alone or rack mount configurations and may be powered from an AC or DC supply.
FEATURES AND SPECIFICATIONS
COMPATIBILITY – V22bis, V22, V21, BELL 212A, BELL 103J.
DTE INTERFACE – RS-232C (V24). Asynchronous: Autobaud or selectable formats to 2400bps.
AUTO DIAL MODES – Standard AT compatible dial commands or DTR dial of stored number.
ANSWER MODES – Standard auto answer or manual answer under DTE control.
CONFIGURATION CONTROL – Standard AT commands.
LINE INTERFACE – DIAL: 2 Wire Pulse or DTMF – XMT level: – 12dBm, RCV sensitivity: -43dBm 2 WIRE LEASED – XMT level: Adjustable RCV sensitivity: -43dBm 4 WIRE LEASED – XMT level: Adjustable RCV sensitivity: -43dBm May also be used in 2 or 4 wire short haul applications
POWER (STAND ALONE ) –
115VAC – DC automatically adjust to 9-14VDC, 162ma power draw @ 12VDC
Optional wide range DC supply operates from 5.5-14VDC, 162ma power draw @ 12VDC
Optional 18-75VDC, 114ma power draw @ 24VDC, 60ma @ 48VDC
(NOTE power plug polarity – center pin is positive and the out side of 5.5 barrel connector is negative)
POWER (RACK MOUNT) – Standard CC-2016 rack automatically adjusts to 85-265VAC, 27-44OHz. Optional DC supply automatically adjusts to positive or negative 36-75VDC.
ENVIRONMENTAL – Operating temperature range: -30 to +75C. Humidity: 90% non-condensing.
APPROVALS – Standard: FCC Part 68 61 Part 15, Class A” Optional: International approvals available.
PHYSICAL (STAND ALONE UNITS) – Dimensions: 5.30″L x 5.05″W x 1.53″H. Weight: l2oz.
PHYSICAL (RACK MOUNT) – Fits standard CC-2016 rack. 4.73″L x 4.60″W x.80″H. Weight: 9oz.
RACKS – The CC-2016-XX Series of 16 Slot Rack Mount Enclosures
These enclosures provide 16 modem slots in a standard 19 inch form factor which is 5 inches high and 6.5 inches in depth. The standard power system auto ranges from 85 to 265VAC with a frequency range of 27 – 440hz. An optional DC supply is also available for installations requiring operation on 36 – 75VDC. All rack configurations are designed for operation from -20C to +70C and offer a mean time between failure (MTBF) of 200,000 hours (22.8) years.
BRACKET – 19 Inch Rack Mount Bracket For All Stand Alone Models
This bracket provides mounting forthree 5″x 5″stand alone rnodems or two 5″ by 7″ mufti-port modems wfthin a standard 19 inch rack.
BRACKET – 9 Inch Wall Mount Bracket For All Stand Alone Models
This wall mount bracket may be attached to all 5″ x 5″ or 5″ x 7″ stand alone models.
2400E-000-2 Stand alone, for 2-wire dial circuits. Power: 115vac or 9-14vdc – 162ma power draw @ 12VDC
2400E-030-2 Stand alone, for 2-wire dial and 2-wire leased circuits. Power: 115vac or 9-14vdc 162ma power draw @ 12VDC
2400E-230-2 Stand alone, for 2-wire dial and 2-wire leased circuits. Power: 5.5-14vdc 162ma power draw @ 12VDC
2400E-330-2 Stand alone, for 2-wire dial and 2-wire leased circuits. Power: 18-75vdc
114ma power draw @ 24VDC, 60ma @ 48VDC
2400R-030-2 Rack mount, for 2-wire dial and 2-wire leased circuits.
2400E-030-4 Stand alone, for 2-wire dial and 2 or 4-wire leased circuits. Power: 9vac or 9-14vdc
2400E-230-4 Stand alone, for 2-wire dial and 2 or 4-wire leased circuits. Power: 5.5-14vdc
2400E-330-4 Stand alone, for 2-wire dial and 2 or 4-wire leased circuits. Power: 19-75vdc
2400R-030-4 Rack mount, for 2-wire dial and 2 or 4-wire leased circuits.
2400E-034-2 Stand alone, Quick Connect for dial-up transaction processing. Power: 115vac or 9-14vdc
2400R-034-2 Rack mount, Quick Connect for dial-up transaction processing applications.
|Dimensions||5 × 5 × 5 in|